Severity: Warning
Message: session_start(): open(/opt/alt/php55/var/lib/php/session/sess_g95e1kms2duugaci0i3ej4k6b5, O_RDWR) failed: Disk quota exceeded (122)
Filename: controllers/home.php
Line Number: 6
| Key Features To Consider In Stretch Film Selection | ||
| Factor | Situation | Solutions |
| Is there a centralized packaging area? | Yes | Consider Using Wrapping Equipment |
| No | Likely candidate for hand wrapping | |
| What is the production volume? | Low ( < 30 pallets/8 hours) | Hand applied film |
| Medium (30-100 pallets/8 hours) | Semi-automatic machine applied film | |
| High ( > 100 pallets/8 hours) | Automatic film application | |
| What is the load weight? | Low (Under 1 200 Ibs) | 60 gauge or below hand or machine applied film |
| Medium (1 200-2000 Ibs) | 63-80 gauge hand or machine applied film | |
| High (Over 2000 Ibs) | 90 gauge or above hand or machine applied film | |
| What is the load type? | Type "A" - Regular shaped pallet with product fitting pallet closely | 60 gauge or below hand or machine applied film |
| Type "B" - Slightly irregular load - corners and/or product fitting within 3 inches on sides | 63-80 gauge hand or machine applied film | |
| Type "C" - Highly irregular loads and/or loads which are greater than 3 inches from fit¬ting size of pallet | 90 gauge or above hand or machine applied film | |
| What is the speed of the film application? | Low (hand applied or < 15 RPM) | Any hand wrap or machine grade film |
| Medium (machine applied 16-25 RPM) | Any machine grade film | |
| High (machine applied above 25 RPM) | SSC or Genesys film | |